// This example shows how to subscribe to dataset messages with RawData field encoding, specifying the metadata necessary
// for their decoding directly in the code.
//
// In order to produce network messages for this example, run the UADemoPublisher tool. For documentation, see
// https://kb.opclabs.com/UADemoPublisher_Basics . In some cases, you may have to specify the interface name to be used.
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.Configuration;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void Metadata()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "opc.udp://239.0.0.1";
            // In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
            // the statement below. Your actual interface name may differ, of course.
            //pubSubConnectionDescriptor.ResourceAddress.InterfaceName = "Ethernet";

            // Define the filter. Publisher Id (unsigned 16-bits) is 30, and the writer group Id is 101.
            // The dataset writer Id (1) must not be specified in the filter, because it does not appear in the message.
            var filter = new UASubscribeDataSetFilter(UAPublisherId.CreateUInt16(30), writerGroupDescriptor: 101);

            // Define the metadata, with the use of collection initializer for its fields.
            var metaData = new UADataSetMetaData
            {
                new UAFieldMetaData("BoolToggle", UABuiltInType.Boolean),
                new UAFieldMetaData("Int32", UABuiltInType.Int32),
                new UAFieldMetaData("Int32Fast", UABuiltInType.Int32),
                new UAFieldMetaData("DateTime", UABuiltInType.DateTime)
            };

            // Define the dataset subscription, with specific communication parameters.
            // The dataset offset is needed with messages that do not contain dataset writer Ids and use RawData field
            // encoding. An exception to this rule is when the dataset is the only or first in the dataset message payload,
            // which is also the case here, but we are specifying the dataset offset anyway, for illustration.
            var dataSetSubscriptionDescriptor = new UADataSetSubscriptionDescriptor(
                pubSubConnectionDescriptor, filter, metaData)
            {
                CommunicationParameters = { UadpDataSetReaderMessageParameters = { DataSetOffset = 15 }}
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_Metadata;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(dataSetSubscriptionDescriptor);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_Metadata(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessageBrief}");
            }
        }

        // Example output:
        //
        //Subscribing...
        //Processing dataset message events for 20 seconds...
        //
        //Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
        //[BoolToggle, False {System.Boolean}; Good]
        //[Int32, 3072 {System.Int32}; Good]
        //[Int32Fast, 894 {System.Int32}; Good]
        //[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
        //[BoolToggle, False {System.Boolean}; Good]
        //[Int32, 3072 {System.Int32}; Good]
        //[Int32Fast, 920 {System.Int32}; Good]
        //[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
        //[BoolToggle, False {System.Boolean}; Good]
        //[Int32, 3073 {System.Int32}; Good]
        //[Int32Fast, 1003 {System.Int32}; Good]
        //[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
        //[BoolToggle, False {System.Boolean}; Good]
        //[Int32, 3073 {System.Int32}; Good]
        //[Int32Fast, 1074 {System.Int32}; Good]
        //[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
        //[BoolToggle, True {System.Boolean}; Good]
        //[Int32, 3074 {System.Int32}; Good]
        //[Int32Fast, 1140 {System.Int32}; Good]
        //[DateTime, 10/1/2019 12:21:16 PM {System.DateTime}; Good]
        //
        //...
    }
}

// This example shows how to subscribe to all dataset messages on an OPC-UA PubSub connection with MQTT JSON mapping using
// TCP.
//
// The following package needs to be referenced in your project (or otherwise made available) for the MQTT transport to 
// work.
// - OpcLabs.MqttNet
// Refer to the documentation for more information.
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.Engine;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void MqttJsonTcp()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            // Default port with MQTT is 1883.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "mqtt://opcua-pubsub.demo-this.com";
            // Specify the transport protocol mapping.
            // The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
            // https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
            pubSubConnectionDescriptor.TransportProfileUriString = UAPubSubTransportProfileUriStrings.MqttJson;

            // Define the arguments for subscribing to the dataset, specifying the MQTT topic name.
            var subscribeDataSetArguments = new UASubscribeDataSetArguments(pubSubConnectionDescriptor)
            {
                DataSetSubscriptionDescriptor = {CommunicationParameters = {BrokerDataSetReaderTransportParameters =
                {
                    QueueName = "opcuademo/json"
                }}}
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_MqttJsonTcp;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(subscribeDataSetArguments);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_MqttJsonTcp(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessage}");
            }
        }

        // Example output:
        //
        //Subscribing...
        //Processing dataset message events for 20 seconds...
        //
        //Dataset data: 2020-01-21T17:07:19.778,836,700,00; Good; Data; publisher=[String]31, class=eae79794-1af7-4f96-8401-4096cd1d8908, fields: 4
        //[BoolToggle, True {System.Boolean} @2020-01-21T16:07:19.778,836,700,00; Good]
        //[Int32, 482 {System.Int64} @2020-01-21T16:07:19.778,836,700,00; Good]
        //[Int32Fast, 2287 {System.Int64} @2020-01-21T16:07:19.778,836,700,00; Good]
        //[DateTime, 1/21/2020 5:07:19 PM {System.DateTime} @2020-01-21T16:07:19.778,836,700,00; Good]
        //
        //Dataset data: Good; Data; publisher=[String]32, fields: 4
        //[BoolToggle, True {System.Boolean}; Good]
        //[Int32, 482 {System.Int32}; Good]
        //[Int32Fast, 2287 {System.Int32}; Good]
        //[DateTime, 1/21/2020 5:07:19 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=[String]32, fields: 100
        //[Mass_0, 82 {System.Int64}; Good]
        //[Mass_1, 182 {System.Int64}; Good]
        //[Mass_2, 282 {System.Int64}; Good]
        //[Mass_3, 382 {System.Int64}; Good]
        //[Mass_4, 482 {System.Int64}; Good]
        //[Mass_5, 582 {System.Int64}; Good]
        //[Mass_6, 682 {System.Int64}; Good]
        //[Mass_7, 782 {System.Int64}; Good]
        //[Mass_8, 882 {System.Int64}; Good]
        //[Mass_9, 982 {System.Int64}; Good]
        //[Mass_10, 1082 {System.Int64}; Good]
        ////...
    }
}

// This example shows how to subscribe to all dataset messages on an OPC-UA PubSub connection with MQTT UADP mapping using
// TCP.
//
// The OpcLabs.MqttNet assembly needs to be referenced in your project (or otherwise made available, together with its
// dependencies) for the MQTT transport to work. Refer to the documentation for more information.
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.Engine;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void MqttUadpTcp()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            // Default port with MQTT is 1883.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "mqtt://opcua-pubsub.demo-this.com";
            // Specify the transport protocol mapping.
            // The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
            // https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
            pubSubConnectionDescriptor.TransportProfileUriString = UAPubSubTransportProfileUriStrings.MqttUadp;

            // Define the arguments for subscribing to the dataset, specifying the MQTT topic name.
            var subscribeDataSetArguments = new UASubscribeDataSetArguments(pubSubConnectionDescriptor)
            {
                DataSetSubscriptionDescriptor = {CommunicationParameters = {BrokerDataSetReaderTransportParameters =
                {
                    QueueName = "opcuademo/uadp/none"
                }}}
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_MqttUadpTcp;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(subscribeDataSetArguments);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_MqttUadpTcp(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessage}");
            }
        }

        // Example output:
        //
        //Subscribing...
        //Processing dataset message events for 20 seconds...
        //
        //Dataset data: Good; Data; publisher="32", writer=1, class=eae79794-1af7-4f96-8401-4096cd1d8908, fields: 4
        //[#0, False {System.Boolean}; Good]
        //[#1, 6685 {System.Int32}; Good]
        //[#2, 1444 {System.Int32}; Good]
        //[#3, 1/4/2020 6:06:20 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher="32", writer=3, class=96976b7b-0db7-46c3-a715-0979884b55ae, fields: 100
        //[#0, 85 {System.Int64}; Good]
        //[#1, 185 {System.Int64}; Good]
        //[#2, 285 {System.Int64}; Good]
        //[#3, 385 {System.Int64}; Good]
        //[#4, 485 {System.Int64}; Good]
        //[#5, 585 {System.Int64}; Good]
        //[#6, 685 {System.Int64}; Good]
        //[#7, 785 {System.Int64}; Good]
        //[#8, 885 {System.Int64}; Good]
        //[#9, 985 {System.Int64}; Good]
        //[#10, 1085 {System.Int64}; Good]
        //...
    }
}

// This example shows how to securely subscribe to signed and encrypted dataset messages.
// An external Security Key Service (SKS) is needed (not a part of QuickOPC).
//
// The network messages for this example can be published e.g. using the UADemoPublisher tool - see
// https://kb.opclabs.com/How_to_publish_or_subscribe_to_secure_OPC_UA_PubSub_messages .
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA.Engine;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void Secure()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "opc.udp://239.0.0.1";
            // In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
            // the statement below. Your actual interface name may differ, of course.
            //pubSubConnectionDescriptor.ResourceAddress.InterfaceName = "Ethernet";

            // Define the arguments for subscribing to the dataset.
            var subscribeDataSetArguments = new UASubscribeDataSetArguments(pubSubConnectionDescriptor)
            {
                DataSetSubscriptionDescriptor =
                {
                    CommunicationParameters =
                    {
                        // Specifies the security mode for the PubSub network messages received. This is a minimum security
                        // mode that you want to accept.
                        SecurityMode = UAMessageSecurityModes.SecuritySignAndEncrypt,
                        SecurityKeyServiceTemplate =
                        {
                            // Specifies the URL of the SKS (Security Key Service) endpoint.
                            UrlString = "opc.tcp://localhost:48010", 
                            // Specifies the security mode that will be used to connect to the SKS.
                            EndpointSelectionPolicy = UAMessageSecurityModes.SecuritySignAndEncrypt,
                            // Specifies the user name and password used for "logging in" to the SKS.
                            UserIdentity = { UserNameTokenInfo = { UserName = "root", Password = "secret" }}
                        },
                        // Specifies the Id of the security group in the SKS that will be used (the security group in the
                        // SKS is configured to use certain security policy, and has other parameters detailing how the
                        // security keys are generated).
                        SecurityGroupId = "TestGroup"
                    }
                }
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_Secure;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(subscribeDataSetArguments);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_Secure(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessageBrief}");
            }
        }
    }
}