QuickOPC User's Guide and Reference
CommunicationParameters Property (_UADataSetSubscriptionDescriptor)
Example 



OpcLabs.EasyOpcUA Assembly > OpcLabs.EasyOpc.UA.PubSub.ComTypes Namespace > _UADataSetSubscriptionDescriptor Interface : CommunicationParameters Property
The communication parameters to be used by the subscriber.
Syntax
'Declaration
 
<NotNullAttribute()>
Property CommunicationParameters As UASubscriberCommunicationParameters
'Usage
 
Dim instance As _UADataSetSubscriptionDescriptor
Dim value As UASubscriberCommunicationParameters
 
instance.CommunicationParameters = value
 
value = instance.CommunicationParameters
[NotNull()]
UASubscriberCommunicationParameters CommunicationParameters {get; set;}
[NotNull()]
property UASubscriberCommunicationParameters^ CommunicationParameters {
   UASubscriberCommunicationParameters^ get();
   void set (    UASubscriberCommunicationParameters^ value);
}
Remarks

Communication parameters do not have a state that would trigger resolution. They are, however, resolved together with the filter.

The subscriber communication parameters specify details of how the OPC UA PubSub communication is performed. As opposed to the PubSub connection descriptor, which contains parameters needed to establish and maintain the connection to the message-oriented middleware, the subscriber communication parameters are more concerned with the actual communication that takes place after the PubSub connection is established.

The subscriber communication parameters are represented by the UASubscriberCommunicationParameters Class.

There are various communication parameters that can be set, and whether some of them are used also depends on whether broker-based middleware, or broker-less model is in use. PubSub security is also configured using communication parameters.

The most important part of the communication parameters is the

Communication parameters with broker-based middleware

With broker-based middleware, you will typically need to set the broker queue name in the subscriber communication parameters (unless the logical resolution process provides this information for you). This is done inside the BrokerDataSetReaderTransportParameters Property, which contains sub-parameters used with broker-based middleware. The QueueName Property could be the name of a queue or topic defined in the broker (depending on the terminology used by the protocol in use).

The setting of the broker queue name is illustrated in the example below.

// This example shows how to subscribe to all dataset messages on an OPC-UA PubSub connection with MQTT UADP mapping using
// TCP.
//
// The OpcLabs.MqttNet assembly needs to be referenced in your project (or otherwise made available, together with its
// dependencies) for the MQTT transport to work. Refer to the documentation for more information.

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.Engine;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void MqttUadpTcp()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            // Default port with MQTT is 1883.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "mqtt://opcua-pubsub.demo-this.com";
            // Specify the transport protocol mapping.
            // The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
            // https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
            pubSubConnectionDescriptor.TransportProfileUriString = UAPubSubTransportProfileUriStrings.MqttUadp;

            // Define the arguments for subscribing to the dataset, specifying the MQTT topic name.
            var subscribeDataSetArguments = new UASubscribeDataSetArguments(pubSubConnectionDescriptor)
            {
                DataSetSubscriptionDescriptor = {CommunicationParameters = {BrokerDataSetReaderTransportParameters =
                {
                    QueueName = "opcuademo/uadp/none"
                }}}
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_MqttUadpTcp;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(subscribeDataSetArguments);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_MqttUadpTcp(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessage}");
            }
        }

        // Example output:
        //
        //Subscribing...
        //Processing dataset message events for 20 seconds...
        //
        //Dataset data: Good; Data; publisher="32", writer=1, class=eae79794-1af7-4f96-8401-4096cd1d8908, fields: 4
        //[#0, False {System.Boolean}; Good]
        //[#1, 6685 {System.Int32}; Good]
        //[#2, 1444 {System.Int32}; Good]
        //[#3, 1/4/2020 6:06:20 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher="32", writer=3, class=96976b7b-0db7-46c3-a715-0979884b55ae, fields: 100
        //[#0, 85 {System.Int64}; Good]
        //[#1, 185 {System.Int64}; Good]
        //[#2, 285 {System.Int64}; Good]
        //[#3, 385 {System.Int64}; Good]
        //[#4, 485 {System.Int64}; Good]
        //[#5, 585 {System.Int64}; Good]
        //[#6, 685 {System.Int64}; Good]
        //[#7, 785 {System.Int64}; Good]
        //[#8, 885 {System.Int64}; Good]
        //[#9, 985 {System.Int64}; Good]
        //[#10, 1085 {System.Int64}; Good]
        //...
    }
}
# This example shows how to subscribe to all dataset messages on an OPC-UA PubSub connection with MQTT UADP mapping
# using TCP.
#
# The following package needs to be referenced in your project (or otherwise made available) for the MQTT transport to
# work.
# - OpcLabs.MqttNet
# Refer to the documentation for more information.

# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc
import time

# Import .NET namespaces.
from OpcLabs.EasyOpc.UA.PubSub import *
from OpcLabs.EasyOpc.UA.PubSub.Engine import *
from OpcLabs.EasyOpc.UA.PubSub.OperationModel import *


def dataSetMessage(sender, e):
    # Display the dataset.
    if e.Succeeded:
        # An event with null DataSetData just indicates a successful connection.
        if e.DataSetData is not None:
            print('')
            print('Dataset data: ', e.DataSetData, sep='')
            for pair in e.DataSetData.FieldDataDictionary:
                print(pair)
    else:
        print('')
        print('*** Failure: ', e.ErrorMessageBrief, sep='')


# Define the PubSub connection we will work with. Uses implicit conversion from a string.
# Default port with MQTT is 1883.
pubSubConnectionDescriptor = UAPubSubConnectionDescriptor.op_Implicit('mqtt://opcua-pubsub.demo-this.com')
# Specify the transport protocol mapping.
# The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
# https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
pubSubConnectionDescriptor.TransportProfileUriString = UAPubSubTransportProfileUriStrings.MqttUadp

# Define the arguments for subscribing to the dataset, specifying the MQTT topic name.
subscribeDataSetArguments = UASubscribeDataSetArguments(pubSubConnectionDescriptor)
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.BrokerDataSetReaderTransportParameters.\
    QueueName = 'opcuademo/uadp/none'

# Instantiate the subscriber object and hook events.
subscriber = EasyUASubscriber()
subscriber.DataSetMessage += dataSetMessage

print('Subscribing...')
IEasyUASubscriberExtension.SubscribeDataSet(subscriber, subscribeDataSetArguments)

print('Processing dataset message events for 20 seconds...')
time.sleep(20)

print('Unsubscribing...')
subscriber.UnsubscribeAllDataSets()

print('Waiting for 1 second...')
# Unsubscribe operation is asynchronous, messages may still come for a short while.
time.sleep(1)

subscriber.DataSetMessage -= dataSetMessage

print('Finished.')

Manually configuring format of JSON messages

In some situations, more communication parameters need to be set - for example, when JSON message mapping is used, and the automatic format recognition provided by QuickOPC is turned off, such as in the example below.

// This example shows how to set parameters specific to JSON message mapping.
//
// The following package needs to be referenced in your project (or otherwise made available) for the MQTT transport to 
// work.
// - OpcLabs.MqttNet
// Refer to the documentation for more information.

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA.AddressSpace;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.Configuration;
using OpcLabs.EasyOpc.UA.PubSub.Engine;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void MappingParameters()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            // Default port with MQTT is 1883.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "mqtt://opcua-pubsub.demo-this.com";
            // Specify the transport protocol mapping.
            // The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
            // https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
            pubSubConnectionDescriptor.TransportProfileUriString = UAPubSubTransportProfileUriStrings.MqttJson;

            // Set a custom property on the PubSub connection that influences how the JSON parsing works. 
            // We are instructing the message parser to turn off the automatic recognition of message format.
            // For more details, see https://kb.opclabs.com/OPC_UA_PubSub_JSON_mapping_component .
            pubSubConnectionDescriptor.CustomPropertyValueDictionary[new UAQualifiedName("{OpcLabs}",
                "OpcLabs.EasyOpc.UA.Toolkit.PubSub.Sdk.JsonReceiveMessageMapping.MessageParsingParameters.AutoRecognizeMessageFormat")] =
                false;

            // Define the arguments for subscribing to the dataset.
            var subscribeDataSetArguments = new UASubscribeDataSetArguments(pubSubConnectionDescriptor)
            {
                DataSetSubscriptionDescriptor =
                {
                    CommunicationParameters =
                    {
                        BrokerDataSetReaderTransportParameters = {QueueName = "opcuademo/json"},
                        // We must set the DataSetFieldContentMask when the format auto-recognition is turned off.
                        DataSetFieldContentMask = UADataSetFieldContentMask.RawData,
                        JsonDataSetReaderMessageParameters =
                        {
                            // We must set the DataSetMessageContentMask when the format auto-recognition is turned off.
                            DataSetMessageContentMask =
                                UAJsonDataSetMessageContentMask.DataSetWriterId |
                                UAJsonDataSetMessageContentMask.SequenceNumber |
                                UAJsonDataSetMessageContentMask.Status,
                            // We must set the NetworkMessageContentMask when the format auto-recognition is turned off.
                            NetworkMessageContentMask =
                                UAJsonNetworkMessageContentMask.NetworkMessageHeader |
                                UAJsonNetworkMessageContentMask.DataSetMessageHeader |
                                UAJsonNetworkMessageContentMask.PublisherId
                        }
                    },
                    Filter =
                    {
                        DataSetWriterDescriptor = 1,
                    }
                }
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_MappingParameters;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(subscribeDataSetArguments);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_MappingParameters(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessage}");
            }
        }

        // Example output:
        //
        //Subscribing...
        //Processing dataset message events for 20 seconds...
        //
        //Dataset data: Good; Data; publisher=[String]30, writer=1, fields: 4
        //[BoolToggle, True {System.Boolean}; Good]
        //[Int32, 9034 {System.Int64}; Good]
        //[Int32Fast, 1751 {System.Int64}; Good]
        //[DateTime, 1/30/2020 5:23:11 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=[String]30, writer=1, fields: 4
        //[BoolToggle, True {System.Boolean}; Good]
        //[Int32, 9036 {System.Int64}; Good]
        //[Int32Fast, 2526 {System.Int64}; Good]
        //[DateTime, 1/30/2020 5:23:13 PM {System.DateTime}; Good]
        //...
    }
}
# This example shows how to set parameters specific to JSON message mapping.
#
# The following package needs to be referenced in your project (or otherwise made available) for the MQTT transport to
# work.
# - OpcLabs.MqttNet
# Refer to the documentation for more information.

# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc
import opclabs_mqttnet
import time

# Import .NET namespaces.
from OpcLabs.EasyOpc.UA.AddressSpace import *
from OpcLabs.EasyOpc.UA.PubSub import *
from OpcLabs.EasyOpc.UA.PubSub.Configuration import *
from OpcLabs.EasyOpc.UA.PubSub.Engine import *
from OpcLabs.EasyOpc.UA.PubSub.OperationModel import *


def dataSetMessage(sender, e):
    # Display the dataset.
    if e.Succeeded:
        # An event with null DataSetData just indicates a successful connection.
        if e.DataSetData is not None:
            print('')
            print('Dataset data: ', e.DataSetData, sep='')
            for pair in e.DataSetData.FieldDataDictionary:
                print(pair)
    else:
        print('')
        print('*** Failure: ', e.ErrorMessageBrief, sep='')


# Define the PubSub connection we will work with. Uses implicit conversion from a string.
# Default port with MQTT is 1883.
pubSubConnectionDescriptor = UAPubSubConnectionDescriptor.op_Implicit('mqtt://opcua-pubsub.demo-this.com')
# Specify the transport protocol mapping.
# The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
# https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
pubSubConnectionDescriptor.TransportProfileUriString = UAPubSubTransportProfileUriStrings.MqttJson

# Set a custom property on the PubSub connection that influences how the JSON parsing works.
# We are instructing the message parser to turn off the automatic recognition of message format.
# For more details, see https://kb.opclabs.com/OPC_UA_PubSub_JSON_mapping_component .
pubSubConnectionDescriptor.CustomPropertyValueDictionary.set_Item(
    UAQualifiedName(
        '{OpcLabs}',
        'OpcLabs.EasyOpc.UA.Toolkit.PubSub.Sdk.JsonReceiveMessageMapping.MessageParsingParameters.AutoRecognizeMessageFormat'), False)

# Define the arguments for subscribing to the dataset.
subscribeDataSetArguments = UASubscribeDataSetArguments(pubSubConnectionDescriptor)
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.BrokerDataSetReaderTransportParameters.\
    QueueName = 'opcuademo/json'
# We must set the DataSetFieldContentMask when the format auto-recognition is turned off.
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.\
    DataSetFieldContentMask = UADataSetFieldContentMask.RawData
# We must set the DataSetMessageContentMask when the format auto-recognition is turned off.
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.JsonDataSetReaderMessageParameters.\
    DataSetMessageContentMask =\
        UAJsonDataSetMessageContentMask.DataSetWriterId |\
        UAJsonDataSetMessageContentMask.SequenceNumber |\
        UAJsonDataSetMessageContentMask.Status
# We must set the NetworkMessageContentMask when the format auto-recognition is turned off.
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.JsonDataSetReaderMessageParameters.\
    NetworkMessageContentMask =\
        UAJsonNetworkMessageContentMask.NetworkMessageHeader |\
        UAJsonNetworkMessageContentMask.DataSetMessageHeader |\
        UAJsonNetworkMessageContentMask.PublisherId
subscribeDataSetArguments.DataSetSubscriptionDescriptor.Filter.DataSetWriterDescriptor = UADataSetWriterDescriptor(1)

# Instantiate the subscriber object and hook events.
subscriber = EasyUASubscriber()
subscriber.DataSetMessage += dataSetMessage

print('Subscribing...')
IEasyUASubscriberExtension.SubscribeDataSet(subscriber, subscribeDataSetArguments)

print('Processing dataset message events for 20 seconds...')
time.sleep(20)

print('Unsubscribing...')
subscriber.UnsubscribeAllDataSets()

print('Waiting for 1 second...')
# Unsubscribe operation is asynchronous, messages may still come for a short while.
time.sleep(1)

subscriber.DataSetMessage -= dataSetMessage

print('Finished.')

In order to explore the various options that control the format of JSON messages, you can use the OPC UA PubSub Formatter tool.

Secure PubSub communication

For concepts around secure OPC UA PubSub communication, see OPC UA PubSub Security . There are three main parameters that need to be configured:

The example below configures the necessary parameters and then subscribes with them to secure dataset messages.

.NET

// This example shows how to securely subscribe to signed and encrypted dataset messages.
// An external Security Key Service (SKS) is needed (not a part of QuickOPC).
//
// The network messages for this example can be published e.g. using the UADemoPublisher tool - see
// https://kb.opclabs.com/How_to_publish_or_subscribe_to_secure_OPC_UA_PubSub_messages .

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA.Engine;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void Secure()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "opc.udp://239.0.0.1";
            // In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
            // the statement below. Your actual interface name may differ, of course.
            //pubSubConnectionDescriptor.ResourceAddress.InterfaceName = "Ethernet";

            // Define the arguments for subscribing to the dataset.
            var subscribeDataSetArguments = new UASubscribeDataSetArguments(pubSubConnectionDescriptor)
            {
                DataSetSubscriptionDescriptor =
                {
                    CommunicationParameters =
                    {
                        // Specifies the security mode for the PubSub network messages received. This is a minimum security
                        // mode that you want to accept.
                        SecurityMode = UAMessageSecurityModes.SecuritySignAndEncrypt,
                        SecurityKeyServiceTemplate =
                        {
                            // Specifies the URL of the SKS (Security Key Service) endpoint.
                            UrlString = "opc.tcp://localhost:48010", 
                            // Specifies the security mode that will be used to connect to the SKS.
                            EndpointSelectionPolicy = UAMessageSecurityModes.SecuritySignAndEncrypt,
                            // Specifies the user name and password used for "logging in" to the SKS.
                            UserIdentity = { UserNameTokenInfo = { UserName = "root", Password = "secret" }}
                        },
                        // Specifies the Id of the security group in the SKS that will be used (the security group in the
                        // SKS is configured to use certain security policy, and has other parameters detailing how the
                        // security keys are generated).
                        SecurityGroupId = "TestGroup"
                    }
                }
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_Secure;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(subscribeDataSetArguments);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_Secure(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessageBrief}");
            }
        }
    }
}
# This example shows how to securely subscribe to signed and encrypted dataset messages.
# An external Security Key Service (SKS) is needed (not a part of QuickOPC).
#
# In order to produce network messages for this example, run the UADemoPublisher tool. For documentation, see
# http://kb.opclabs.com/UADemoPublisher_Basics . In some cases, you may have to specify the interface name to be used.

# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc
import time

# Import .NET namespaces.
from OpcLabs.EasyOpc.UA.Engine import *
from OpcLabs.EasyOpc.UA.PubSub import *
from OpcLabs.EasyOpc.UA.PubSub.OperationModel import *


def dataSetMessage(sender, e):
    # Display the dataset.
    if e.Succeeded:
        # An event with null DataSetData just indicates a successful connection.
        if e.DataSetData is not None:
            print('')
            print('Dataset data: ', e.DataSetData, sep='')
            for pair in e.DataSetData.FieldDataDictionary:
                print(pair)
    else:
        print('')
        print('*** Failure: ', e.ErrorMessageBrief, sep='')


# Define the PubSub connection we will work with. Uses implicit conversion from a string.
pubSubConnectionDescriptor = UAPubSubConnectionDescriptor.op_Implicit('opc.udp://239.0.0.1')
# In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
# the statement below. Your actual interface name may differ, of course.
#pubSubConnectionDescriptor.ResourceAddress.InterfaceName = 'Ethernet'

# Define the arguments for subscribing to the dataset.
subscribeDataSetArguments = UASubscribeDataSetArguments(pubSubConnectionDescriptor)
# Specifies the security mode for the PubSub network messages received. This is a minimum security
# mode that you want to accept.
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.\
    SecurityMode = UAMessageSecurityModes.SecuritySignAndEncrypt
# Specifies the URL of the SKS (Security Key Service) endpoint.
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.SecurityKeyServiceTemplate.\
    UrlString = 'opc.tcp://localhost:48010'
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.SecurityKeyServiceTemplate.\
    EndpointSelectionPolicy = UAEndpointSelectionPolicy.FromUAMessageSecurityModes(UAMessageSecurityModes.SecuritySignAndEncrypt)
# Specifies the user name and password used for "logging in" to the SKS.
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.SecurityKeyServiceTemplate.\
    UserIdentity.UserNameTokenInfo.UserName = 'root'
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.SecurityKeyServiceTemplate.\
    UserIdentity.UserNameTokenInfo.Password = 'secret'
# Specifies the Id of the security group in the SKS that will be used (the security group in the
# SKS is configured to use certain security policy, and has other parameters detailing how the
# security keys are generated).
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.SecurityGroupId = 'TestGroup'

# Instantiate the subscriber object and hook events.
subscriber = EasyUASubscriber()
subscriber.DataSetMessage += dataSetMessage

print('Subscribing...')
IEasyUASubscriberExtension.SubscribeDataSet(subscriber, subscribeDataSetArguments)

print('Processing dataset message events for 20 seconds...')
time.sleep(20)

print('Unsubscribing...')
subscriber.UnsubscribeAllDataSets()

print('Waiting for 1 second...')
# Unsubscribe operation is asynchronous, messages may still come for a short while.
time.sleep(1)

subscriber.DataSetMessage -= dataSetMessage

print('Finished.')

COM

Rem This example shows how to securely subscribe to signed and encrypted dataset messages.
Rem An external Security Key Service (SKS) is needed (not a part of QuickOPC).
Rem
Rem The network messages for this example can be published e.g. using the UADemoPublisher tool - see
Rem https://kb.opclabs.com/How_to_publish_or_subscribe_to_secure_OPC_UA_PubSub_messages .

' The subscriber object, with events
'Public WithEvents Subscriber6 As EasyUASubscriber

Private Sub EasyUASubscriber_SubscribeDataSet_Secure_Command_Click()
    OutputText = ""
    
    ' Define the PubSub connection we will work with.
    Dim subscribeDataSetArguments As New EasyUASubscribeDataSetArguments
    Dim ConnectionDescriptor As UAPubSubConnectionDescriptor
    Set ConnectionDescriptor = subscribeDataSetArguments.dataSetSubscriptionDescriptor.ConnectionDescriptor
    ConnectionDescriptor.ResourceAddress.ResourceDescriptor.UrlString = "opc.udp://239.0.0.1"
    ' In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
    ' the statement below. Your actual interface name may differ, of course.
    'ConnectionDescriptor.ResourceAddress.InterfaceName := 'Ethernet';

    ' Define the arguments for subscribing to the dataset.
    Dim comunicationParameters As New UASubscriberCommunicationParameters
    ' Specifies the security mode for the PubSub network messages received. This is a minimum security
    ' mode that you want to accept.
    comunicationParameters.SecurityMode = UAMessageSecurityModes_SecuritySignAndEncrypt
    ' Specifies the URL of the SKS (Security Key Service) endpoint.
    comunicationParameters.SecurityKeyServiceTemplate.UrlString = "opc.tcp://localhost:48010"
    ' Specifies the security mode that will be used to connect to the SKS.
    Dim endpointSelectionPolicy As New UAEndpointSelectionPolicy
    endpointSelectionPolicy.AllowedMessageSecurityModes = UAMessageSecurityModes_SecuritySignAndEncrypt
    Set comunicationParameters.SecurityKeyServiceTemplate.endpointSelectionPolicy = endpointSelectionPolicy ' UAMessageSecurityModes_SecuritySignAndEncrypt
    ' Specifies the user name and password used for "logging in" to the SKS.
    comunicationParameters.SecurityKeyServiceTemplate.UserIdentity.UserNameTokenInfo.UserName = "root"
    comunicationParameters.SecurityKeyServiceTemplate.UserIdentity.UserNameTokenInfo.Password = "secret"
    ' Specifies the Id of the security group in the SKS that will be used (the security group in the
    ' SKS is configured to use certain security policy, and has other parameters detailing how the
    ' security keys are generated).
    comunicationParameters.securityGroupId = "TestGroup"
    
    Set subscribeDataSetArguments.dataSetSubscriptionDescriptor.CommunicationParameters = comunicationParameters
    
    ' Instantiate the subscriber object and hook events.
    Set Subscriber6 = New EasyUASubscriber
        
    OutputText = OutputText & "Subscribing..." & vbCrLf
    Call Subscriber6.SubscribeDataSet(subscribeDataSetArguments)

    OutputText = OutputText & "Processing dataset message for 20 seconds..." & vbCrLf
    Pause 20000

    OutputText = OutputText & "Unsubscribing..." & vbCrLf
    Subscriber6.UnsubscribeAllDataSets

    OutputText = OutputText & "Waiting for 1 second..." & vbCrLf
    ' Unsubscribe operation is asynchronous, messages may still come for a short while.
    Pause 1000

    Set Subscriber6 = Nothing

    OutputText = OutputText & "Finished." & vbCrLf
End Sub

Private Sub Subscriber6_DataSetMessage(ByVal sender As Variant, ByVal eventArgs As EasyUADataSetMessageEventArgs)
    ' Display the dataset
    If eventArgs.Succeeded Then
        ' An event with null DataSetData just indicates a successful connection.
        If Not eventArgs.DataSetData Is Nothing Then
            OutputText = OutputText & vbCrLf
            OutputText = OutputText & "Dataset data: " & eventArgs.DataSetData & vbCrLf
            Dim dictionaryEntry2: For Each dictionaryEntry2 In eventArgs.DataSetData.FieldDataDictionary
                OutputText = OutputText & dictionaryEntry2 & vbCrLf
            Next
        End If
    Else
        OutputText = OutputText & vbCrLf
        OutputText = OutputText & eventArgs.ErrorMessageBrief & vbCrLf
    End If
End Sub

 

 

Example

.NET

COM

.NET

COM

.NET

.NET

COM

// This example shows how to subscribe to dataset messages with RawData field encoding, specifying the metadata necessary
// for their decoding directly in the code.
//
// In order to produce network messages for this example, run the UADemoPublisher tool. For documentation, see
// http://kb.opclabs.com/UADemoPublisher_Basics . In some cases, you may have to specify the interface name to be used.

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.Configuration;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void Metadata()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "opc.udp://239.0.0.1";
            // In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
            // the statement below. Your actual interface name may differ, of course.
            //pubSubConnectionDescriptor.ResourceAddress.InterfaceName = "Ethernet";

            // Define the filter. Publisher Id (unsigned 16-bits) is 30, and the writer group Id is 101.
            // The dataset writer Id (1) must not be specified in the filter, because it does not appear in the message.
            var filter = new UASubscribeDataSetFilter(UAPublisherId.CreateUInt16(30), writerGroupDescriptor: 101);

            // Define the metadata, with the use of collection initializer for its fields.
            var metaData = new UADataSetMetaData
            {
                new UAFieldMetaData("BoolToggle", UABuiltInType.Boolean),
                new UAFieldMetaData("Int32", UABuiltInType.Int32),
                new UAFieldMetaData("Int32Fast", UABuiltInType.Int32),
                new UAFieldMetaData("DateTime", UABuiltInType.DateTime)
            };

            // Define the dataset subscription, with specific communication parameters.
            // The dataset offset is needed with messages that do not contain dataset writer Ids and use RawData field
            // encoding. An exception to this rule is when the dataset is the only or first in the dataset message payload,
            // which is also the case here, but we are specifying the dataset offset anyway, for illustration.
            var dataSetSubscriptionDescriptor = new UADataSetSubscriptionDescriptor(
                pubSubConnectionDescriptor, filter, metaData)
            {
                CommunicationParameters = { UadpDataSetReaderMessageParameters = { DataSetOffset = 15 }}
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_Metadata;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(dataSetSubscriptionDescriptor);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_Metadata(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessageBrief}");
            }
        }

        // Example output:
        //
        //Subscribing...
        //Processing dataset message events for 20 seconds...
        //
        //Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
        //[BoolToggle, False {System.Boolean}; Good]
        //[Int32, 3072 {System.Int32}; Good]
        //[Int32Fast, 894 {System.Int32}; Good]
        //[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
        //[BoolToggle, False {System.Boolean}; Good]
        //[Int32, 3072 {System.Int32}; Good]
        //[Int32Fast, 920 {System.Int32}; Good]
        //[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
        //[BoolToggle, False {System.Boolean}; Good]
        //[Int32, 3073 {System.Int32}; Good]
        //[Int32Fast, 1003 {System.Int32}; Good]
        //[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
        //[BoolToggle, False {System.Boolean}; Good]
        //[Int32, 3073 {System.Int32}; Good]
        //[Int32Fast, 1074 {System.Int32}; Good]
        //[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
        //[BoolToggle, True {System.Boolean}; Good]
        //[Int32, 3074 {System.Int32}; Good]
        //[Int32Fast, 1140 {System.Int32}; Good]
        //[DateTime, 10/1/2019 12:21:16 PM {System.DateTime}; Good]
        //
        //...
    }
}
# This example shows how to subscribe to dataset messages with RawData field encoding, specifying the metadata necessary
# for their decoding directly in the code.
#
# In order to produce network messages for this example, run the UADemoPublisher tool. For documentation, see
# http://kb.opclabs.com/UADemoPublisher_Basics . In some cases, you may have to specify the interface name to be used.

# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc
import time

# Import .NET namespaces.
from OpcLabs.EasyOpc.UA import *
from OpcLabs.EasyOpc.UA.PubSub import *
from OpcLabs.EasyOpc.UA.PubSub.Configuration import *
from OpcLabs.EasyOpc.UA.PubSub.OperationModel import *


def dataSetMessage(sender, e):
    # Display the dataset.
    if e.Succeeded:
        # An event with null DataSetData just indicates a successful connection.
        if e.DataSetData is not None:
            print('')
            print('Dataset data: ', e.DataSetData, sep='')
            for pair in e.DataSetData.FieldDataDictionary:
                print(pair)
    else:
        print('')
        print('*** Failure: ', e.ErrorMessageBrief, sep='')


# Define the PubSub connection we will work with. Uses implicit conversion from a string.
pubSubConnectionDescriptor = UAPubSubConnectionDescriptor.op_Implicit('opc.udp://239.0.0.1')
# In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
# the statement below. Your actual interface name may differ, of course.
#pubSubConnectionDescriptor.ResourceAddress.InterfaceName = 'Ethernet'

# Define the filter. Publisher Id (unsigned 16-bits) is 30, and the writer group Id is 101.
# The dataset writer Id (1) must not be specified in the filter, because it does not appear in the message.
filter = UASubscribeDataSetFilter(UAPublisherId.CreateUInt16(30),
                                  UAWriterGroupDescriptor(101))

# Define the metadata.
metaData = UADataSetMetaData()
metaData.Add(UAFieldMetaData('BoolToggle', UABuiltInType.Boolean))
metaData.Add(UAFieldMetaData('Int32', UABuiltInType.Int32))
metaData.Add(UAFieldMetaData('Int32Fast', UABuiltInType.Int32))
metaData.Add(UAFieldMetaData('DateTime', UABuiltInType.DateTime))

# Define the dataset subscription, with specific communication parameters.
# The dataset offset is needed with messages that do not contain dataset writer Ids and use RawData field
# encoding. An exception to this rule is when the dataset is the only or first in the dataset message payload,
# which is also the case here, but we are specifying the dataset offset anyway, for illustration.
dataSetSubscriptionDescriptor = UADataSetSubscriptionDescriptor(pubSubConnectionDescriptor, filter, metaData)
dataSetSubscriptionDescriptor.CommunicationParameters.UadpDataSetReaderMessageParameters.DataSetOffset = 15

# Instantiate the subscriber object and hook events.
subscriber = EasyUASubscriber()
subscriber.DataSetMessage += dataSetMessage

print('Subscribing...')
subscriber.SubscribeDataSet(EasyUASubscribeDataSetArguments(dataSetSubscriptionDescriptor))

print('Processing dataset message events for 20 seconds...')
time.sleep(20)

print('Unsubscribing...')
subscriber.UnsubscribeAllDataSets()

print('Waiting for 1 second...')
# Unsubscribe operation is asynchronous, messages may still come for a short while.
time.sleep(1)

subscriber.DataSetMessage -= dataSetMessage

print('Finished.')
' This example shows how to subscribe to dataset messages with RawData field encoding, specifying the metadata necessary
' for their decoding directly in the code.
'
' In order to produce network messages for this example, run the UADemoPublisher tool. For documentation, see
' http://kb.opclabs.com/UADemoPublisher_Basics . In some cases, you may have to specify the interface name to be used.

Imports OpcLabs.EasyOpc.UA
Imports OpcLabs.EasyOpc.UA.PubSub
Imports OpcLabs.EasyOpc.UA.PubSub.Configuration
Imports OpcLabs.EasyOpc.UA.PubSub.OperationModel

Namespace PubSub._EasyUASubscriber
    Partial Friend Class SubscribeDataSet
        Public Shared Sub Metadata()

            ' Define the PubSub connection we will work with. Uses implicit conversion from a string.
            Dim pubSubConnectionDescriptor As UAPubSubConnectionDescriptor = "opc.udp://239.0.0.1"
            ' In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
            ' the statement below. Your actual interface name may differ, of course.
            ' pubSubConnectionDescriptor.ResourceAddress.InterfaceName = "Ethernet"

            ' Define the filter. Publisher Id (unsigned 16-bits) is 30, and the writer group Id is 101.
            ' The dataset writer Id (1) must Not be specified in the filter, because it does Not appear in the message.
            Dim filter = New UASubscribeDataSetFilter(UAPublisherId.CreateUInt16(30))
            filter.WriterGroupDescriptor.WriterGroupId = 101

            ' Define the metadata, with the use of collection initializer for its fields.
            Dim metaData = New UADataSetMetaData From {
                New UAFieldMetaData("BoolToggle", UABuiltInType.Boolean),
                New UAFieldMetaData("Int32", UABuiltInType.Int32),
                New UAFieldMetaData("Int32Fast", UABuiltInType.Int32),
                New UAFieldMetaData("DateTime", UABuiltInType.DateTime)
            }

            ' Define the dataset subscription, with specific communication parameters.
            ' The dataset offset is needed with messages that do Not contain dataset writer Ids And use RawData field
            ' encoding. An exception to this rule is when the dataset is the only or first in the dataset message payload,
            ' which is also the case here, but we are specifying the dataset offset anyway, for illustration.
            Dim dataSetSubscriptionDescriptor = New UADataSetSubscriptionDescriptor(
                pubSubConnectionDescriptor, filter, metaData)
            dataSetSubscriptionDescriptor.CommunicationParameters.UadpDataSetReaderMessageParameters.DataSetOffset = 15

            ' Instantiate the subscriber object and hook events.
            Dim subscriber = New EasyUASubscriber()
            AddHandler subscriber.DataSetMessage, AddressOf subscriber_DataSetMessage_Metadata

            Console.WriteLine("Subscribing...")
            subscriber.SubscribeDataSet(dataSetSubscriptionDescriptor)

            Console.WriteLine("Processing dataset message events for 20 seconds...")
            Threading.Thread.Sleep(20 * 1000)

            Console.WriteLine("Unsubscribing...")
            subscriber.UnsubscribeAllDataSets()

            Console.WriteLine("Waiting for 1 second...")
            ' Unsubscribe operation is asynchronous, messages may still come for a short while.
            Threading.Thread.Sleep(1 * 1000)

            Console.WriteLine("Finished...")
        End Sub

        Private Shared Sub subscriber_DataSetMessage_Metadata(ByVal sender As Object, ByVal e As EasyUADataSetMessageEventArgs)
            ' Display the dataset.
            If e.Succeeded Then
                ' An event with null DataSetData just indicates a successful connection.
                If e.DataSetData IsNot Nothing Then
                    Console.WriteLine()
                    Console.WriteLine($"Dataset data: {e.DataSetData}")
                    For Each pair As KeyValuePair(Of String, UADataSetFieldData) In e.DataSetData.FieldDataDictionary
                        Console.WriteLine(pair)
                    Next
                End If
            Else
                Console.WriteLine()
                Console.WriteLine($"*** Failure: {e.ErrorMessageBrief}")
            End If
        End Sub
    End Class

    ' Example output
    '
    'Subscribing...
    'Processing dataset message events for 20 seconds...
    '
    'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
    '[BoolToggle, False {System.Boolean}; Good]
    '[Int32, 3072 {System.Int32}; Good]
    '[Int32Fast, 894 {System.Int32}; Good]
    '[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
    '
    'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
    '[BoolToggle, False {System.Boolean}; Good]
    '[Int32, 3072 {System.Int32}; Good]
    '[Int32Fast, 920 {System.Int32}; Good]
    '[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
    '
    'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
    '[BoolToggle, False {System.Boolean}; Good]
    '[Int32, 3073 {System.Int32}; Good]
    '[Int32Fast, 1003 {System.Int32}; Good]
    '[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
    '
    'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
    '[BoolToggle, False {System.Boolean}; Good]
    '[Int32, 3073 {System.Int32}; Good]
    '[Int32Fast, 1074 {System.Int32}; Good]
    '[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
    '
    'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
    '[BoolToggle, True {System.Boolean}; Good]
    '[Int32, 3074 {System.Int32}; Good]
    '[Int32Fast, 1140 {System.Int32}; Good]
    '[DateTime, 10/1/2019 12:21:16 PM {System.DateTime}; Good]
    '
    '...

End Namespace
// This example shows how to subscribe to dataset messages with RawData field encoding, specifying the metadata necessary
// for their decoding directly in the code.
//
// In order to produce network messages for this example, run the UADemoPublisher tool. For documentation, see
// http://kb.opclabs.com/UADemoPublisher_Basics . In some cases, you may have to specify the interface name to be used.

type
  TSubscriberEventHandlers78 = class
    procedure OnDataSetMessage(
      ASender: TObject;
      sender: OleVariant;
      const eventArgs: _EasyUADataSetMessageEventArgs);
  end;

class procedure SubscribeDataSet.Metadata;
var
  ConnectionDescriptor: _UAPubSubConnectionDescriptor;
  Field1, Field2, Field3, Field4: _UAFieldMetaData;
  MetaData: _UADataSetMetaData;
  SubscribeDataSetArguments: _EasyUASubscribeDataSetArguments;
  Subscriber: TEasyUASubscriber;
  SubscriberEventHandlers: TSubscriberEventHandlers78;
begin
  // Define the PubSub connection we will work with.
  SubscribeDataSetArguments := CoEasyUASubscribeDataSetArguments.Create;
  ConnectionDescriptor := SubscribeDataSetArguments.DataSetSubscriptionDescriptor.ConnectionDescriptor;
  ConnectionDescriptor.ResourceAddress.ResourceDescriptor.UrlString := 'opc.udp://239.0.0.1';
  // In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
  // the statement below. Your actual interface name may differ, of course.
  //ConnectionDescriptor.ResourceAddress.InterfaceName := 'Ethernet';

  // Define the filter. Publisher Id (unsigned 16-bits) is 30, and the writer group Id is 101.
  // The dataset writer Id (1) must not be specified in the filter, because it does not appear in the message.
  SubscribeDataSetArguments.DataSetSubscriptionDescriptor.Filter.PublisherId.SetUint16Identifier(30);
  SubscribeDataSetArguments.DataSetSubscriptionDescriptor.Filter.WriterGroupDescriptor.WriterGroupId := 101;

  // Define the metadata. For UADP, the order of field metadata must correspond to the order of fields in the dataset message.
  MetaData := CoUADataSetMetaData.Create;
  //
  Field1 := CoUAFieldMetaData.Create;
  Field1.BuiltInType := UABuiltInType_Boolean;
  Field1.Name := 'BoolToggle';
  MetaData.Add(Field1);
  //
  Field2 := CoUAFieldMetaData.Create;
  Field2.BuiltInType := UABuiltInType_Int32;
  Field2.Name := 'Int32';
  MetaData.Add(Field2);
  //
  Field3 := CoUAFieldMetaData.Create;
  Field3.BuiltInType := UABuiltInType_Int32;
  Field3.Name := 'Int32Fast';
  MetaData.Add(Field3);
  //
  Field4 := CoUAFieldMetaData.Create;
  Field4.BuiltInType := UABuiltInType_DateTime;
  Field4.Name := 'DateTime';
  MetaData.Add(Field4);
  //
  SubscribeDataSetArguments.DataSetSubscriptionDescriptor.DataSetMetaData := MetaData;

  // Define the specific communication parameters for the dataset subscription.
  // The dataset offset is needed with messages that do not contain dataset writer Ids and use RawData field
  // encoding. An exception to this rule is when the dataset is the only or first in the dataset message payload,
  // which is also the case here, but we are specifying the dataset offset anyway, for illustration.
  SubscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.UadpDataSetReaderMessageParameters.DataSetOffset := 15;

  // Instantiate the subscriber object and hook events.
  Subscriber := TEasyUASubscriber.Create(nil);
  SubscriberEventHandlers := TSubscriberEventHandlers78.Create;
  Subscriber.OnDataSetMessage := SubscriberEventHandlers.OnDataSetMessage;

  WriteLn('Subscribing...');
  Subscriber.SubscribeDataSet(SubscribeDataSetArguments);

  WriteLn('Processing dataset message for 20 seconds...');
  PumpSleep(20*1000);

  WriteLn('Unsubscribing...');
  Subscriber.UnsubscribeAllDataSets;

  WriteLn('Waiting for 1 second...');
  // Unsubscribe operation is asynchronous, messages may still come for a short while.
  PumpSleep(1*1000);

  WriteLn('Finished.');
  FreeAndNil(Subscriber);
  FreeAndNil(SubscriberEventHandlers);
end;

procedure TSubscriberEventHandlers78.OnDataSetMessage(
  ASender: TObject;
  sender: OleVariant;
  const eventArgs: _EasyUADataSetMessageEventArgs);
var
  Count: Cardinal;
  DictionaryEntry2: _DictionaryEntry2;
  Element: OleVariant;
  FieldDataDictionaryEnumerator: IEnumVariant;
begin
  // Display the dataset.
  if eventArgs.Succeeded then
  begin
    // An event with null DataSetData just indicates a successful connection.
    if eventArgs.DataSetData <> nil then
    begin
      WriteLn;
      WriteLn('Dataset data: ', eventArgs.DataSetData.ToString);
      FieldDataDictionaryEnumerator := eventArgs.DataSetData.FieldDataDictionary.GetEnumerator;
      while (FieldDataDictionaryEnumerator.Next(1, Element, Count) = S_OK) do
      begin
        DictionaryEntry2 := IUnknown(Element) as _DictionaryEntry2;
        WriteLn(DictionaryEntry2.ToString);
      end;
    end;
  end
  else begin
    WriteLn;
      WriteLn('*** Failure: ', eventArgs.ErrorMessageBrief);
  end;
end;

// Example output:
//
//Subscribing...
//Processing dataset message events for 20 seconds...
//
//Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
//[BoolToggle, False {System.Boolean}; Good]
//[Int32, 3072 {System.Int32}; Good]
//[Int32Fast, 894 {System.Int32}; Good]
//[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
//
//Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
//[BoolToggle, False {System.Boolean}; Good]
//[Int32, 3072 {System.Int32}; Good]
//[Int32Fast, 920 {System.Int32}; Good]
//[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
//
//Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
//[BoolToggle, False {System.Boolean}; Good]
//[Int32, 3073 {System.Int32}; Good]
//[Int32Fast, 1003 {System.Int32}; Good]
//[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
//
//Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
//[BoolToggle, False {System.Boolean}; Good]
//[Int32, 3073 {System.Int32}; Good]
//[Int32Fast, 1074 {System.Int32}; Good]
//[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
//
//Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
//[BoolToggle, True {System.Boolean}; Good]
//[Int32, 3074 {System.Int32}; Good]
//[Int32Fast, 1140 {System.Int32}; Good]
//[DateTime, 10/1/2019 12:21:16 PM {System.DateTime}; Good]
//
//...
Rem This example shows how to subscribe to dataset messages with RawData field encoding, specifying the metadata necessary
Rem for their decoding directly in the code.
Rem
Rem In order to produce network messages for this example, run the UADemoPublisher tool. For documentation, see
Rem http://kb.opclabs.com/UADemoPublisher_Basics . In some cases, you may have to specify the interface name to be used.

Option Explicit

Const UABuiltInType_Boolean = 1
Const UABuiltInType_Int32 = 6
Const UABuiltInType_DateTime = 13

' Define the PubSub connection we will work with.
Dim SubscribeDataSetArguments: Set SubscribeDataSetArguments = CreateObject("OpcLabs.EasyOpc.UA.PubSub.OperationModel.EasyUASubscribeDataSetArguments")
Dim ConnectionDescriptor: Set ConnectionDescriptor = SubscribeDataSetArguments.DataSetSubscriptionDescriptor.ConnectionDescriptor
ConnectionDescriptor.ResourceAddress.ResourceDescriptor.UrlString = "opc.udp://239.0.0.1"
' In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
' the statement below. Your actual interface name may differ, of course.
' ConnectionDescriptor.ResourceAddress.InterfaceName = "Ethernet"

' Define the filter. Publisher Id (unsigned 16-bits) is 30, and the writer group Id is 101.
' The dataset writer Id (1) must not be specified in the filter, because it does not appear in the message.
SubscribeDataSetArguments.DataSetSubscriptionDescriptor.Filter.PublisherId.SetUInt16Identifier 30
SubscribeDataSetArguments.DataSetSubscriptionDescriptor.Filter.WriterGroupDescriptor.WriterGroupId = 101

' Define the metadata. For UADP, the order of field metadata must correspond to the order of fields in the dataset message.
Dim MetaData: Set MetaData = CreateObject("OpcLabs.EasyOpc.UA.PubSub.Configuration.UADataSetMetaData")
'
Dim Field1: Set Field1 = CreateObject("OpcLabs.EasyOpc.UA.PubSub.Configuration.UAFieldMetaData")
Field1.BuiltInType = UABuiltInType_Boolean
Field1.Name = "BoolToggle"
MetaData.Add(Field1)
'
Dim Field2: Set Field2 = CreateObject("OpcLabs.EasyOpc.UA.PubSub.Configuration.UAFieldMetaData")
Field2.BuiltInType = UABuiltInType_Int32
Field2.Name = "Int32"
MetaData.Add(Field2)
'
Dim Field3: Set Field3 = CreateObject("OpcLabs.EasyOpc.UA.PubSub.Configuration.UAFieldMetaData")
Field3.BuiltInType = UABuiltInType_Int32
Field3.Name = "Int32Fast"
MetaData.Add(Field3)
'
Dim Field4: Set Field4 = CreateObject("OpcLabs.EasyOpc.UA.PubSub.Configuration.UAFieldMetaData")
Field4.BuiltInType = UABuiltInType_DateTime
Field4.Name = "DateTime"
MetaData.Add(Field4)
'
Set SubscribeDataSetArguments.DataSetSubscriptionDescriptor.DataSetMetaData = MetaData

' Define the specific communication parameters for the dataset subscription.
' The dataset offset is needed with messages that do not contain dataset writer Ids and use RawData field
' encoding. An exception to this rule is when the dataset is the only or first in the dataset message payload,
' which is also the case here, but we are specifying the dataset offset anyway, for illustration.
SubscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.UadpDataSetReaderMessageParameters.DataSetOffset = 15

' Instantiate the subscriber object and hook events.
Dim Subscriber: Set Subscriber = CreateObject("OpcLabs.EasyOpc.UA.PubSub.EasyUASubscriber")
WScript.ConnectObject Subscriber, "Subscriber_"

WScript.Echo "Subscribing..."
Subscriber.SubscribeDataSet SubscribeDataSetArguments

WScript.Echo "Processing dataset message events for 20 seconds..."
WScript.Sleep 20*1000

WScript.Echo "Unsubscribing..."
Subscriber.UnsubscribeAllDataSets

WScript.Echo "Waiting for 1 second..."
' Unsubscribe operation is asynchronous, messages may still come for a short while.
WScript.Sleep 1*1000

WScript.Echo "Finished."



Sub Subscriber_DataSetMessage(Sender, e)
    ' Display the dataset.
    If e.Succeeded Then
        ' An event with null DataSetData just indicates a successful connection.
        If Not (e.DataSetData Is Nothing) Then
            WScript.Echo
            WScript.Echo "Dataset data: " & e.DataSetData
            Dim Pair: For Each Pair in e.DataSetData.FieldDataDictionary
                WScript.Echo Pair
            Next
        End If
    Else
        WScript.Echo
        WScript.Echo "*** Failure: " & e.ErrorMessageBrief
    End If
End Sub



' Example output:
'
'Subscribing...
'Processing dataset message events for 20 seconds...
'
'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
'[BoolToggle, False {System.Boolean}; Good]
'[Int32, 3072 {System.Int32}; Good]
'[Int32Fast, 894 {System.Int32}; Good]
'[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
'
'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
'[BoolToggle, False {System.Boolean}; Good]
'[Int32, 3072 {System.Int32}; Good]
'[Int32Fast, 920 {System.Int32}; Good]
'[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
'
'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
'[BoolToggle, False {System.Boolean}; Good]
'[Int32, 3073 {System.Int32}; Good]
'[Int32Fast, 1003 {System.Int32}; Good]
'[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
'
'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
'[BoolToggle, False {System.Boolean}; Good]
'[Int32, 3073 {System.Int32}; Good]
'[Int32Fast, 1074 {System.Int32}; Good]
'[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
'
'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
'[BoolToggle, True {System.Boolean}; Good]
'[Int32, 3074 {System.Int32}; Good]
'[Int32Fast, 1140 {System.Int32}; Good]
'[DateTime, 10/1/2019 12:21:16 PM {System.DateTime}; Good]
'
'...
Rem This example shows how to subscribe to dataset messages with RawData field encoding, specifying the metadata necessary
Rem for their decoding directly in the code.
Rem
Rem In order to produce network messages for this example, run the UADemoPublisher tool. For documentation, see
Rem http://kb.opclabs.com/UADemoPublisher_Basics . In some cases, you may have to specify the interface name to be used.

' The subscriber object, with events
'Public WithEvents Subscriber3 As EasyUASubscriber

Private Sub EasyUASubscriber_SubscribeDataSet_Metadata_Command_Click()
    OutputText = ""
    
    ' Define the PubSub connection we will work with.
    Dim subscribeDataSetArguments As New EasyUASubscribeDataSetArguments
    Dim ConnectionDescriptor As UAPubSubConnectionDescriptor
    Set ConnectionDescriptor = subscribeDataSetArguments.dataSetSubscriptionDescriptor.ConnectionDescriptor
    ConnectionDescriptor.ResourceAddress.ResourceDescriptor.UrlString = "opc.udp://239.0.0.1"
    ' In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
    ' the statement below. Your actual interface name may differ, of course.
    'ConnectionDescriptor.ResourceAddress.InterfaceName := 'Ethernet';

    ' Define the filter. Publisher Id (unsigned 16-bits) is 30, and the writer group Id is 101.
    ' The dataset writer Id (1) must not be specified in the filter, because it does not appear in the message.
    Call subscribeDataSetArguments.dataSetSubscriptionDescriptor.Filter.PublisherId.SetUInt16Identifier(30)
    subscribeDataSetArguments.dataSetSubscriptionDescriptor.Filter.WriterGroupDescriptor.WriterGroupId = 101
    
    ' Define the metadata. For UADP, the order of field metadata must correspond to the order of fields in the dataset message.
    Dim metaData As New UADataSetMetaData
    '
    Dim field1 As New UAFieldMetaData
    field1.BuiltInType = UABuiltInType_Boolean
    field1.Name = "BoolToggle"
    metaData.Add field1
    '
    Dim field2 As New UAFieldMetaData
    field2.BuiltInType = UABuiltInType_Int32
    field2.Name = "Int32"
    metaData.Add field2
    '
    Dim field3 As New UAFieldMetaData
    field3.BuiltInType = UABuiltInType_Int32
    field3.Name = "Int32Fast"
    metaData.Add field3
    '
    Dim field4 As New UAFieldMetaData
    field4.BuiltInType = UABuiltInType_DateTime
    field4.Name = "DateTime"
    metaData.Add field4
    '
    Set subscribeDataSetArguments.dataSetSubscriptionDescriptor.DataSetMetaData = metaData
    
    ' Define the specific communication parameters for the dataset subscription.
    ' The dataset offset is needed with messages that do not contain dataset writer Ids and use RawData field
    ' encoding. An exception to this rule is when the dataset is the only or first in the dataset message payload,
    ' which is also the case here, but we are specifying the dataset offset anyway, for illustration.
    subscribeDataSetArguments.dataSetSubscriptionDescriptor.CommunicationParameters.UadpDataSetReaderMessageParameters.DataSetOffset = 15
    
    ' Instantiate the subscriber object and hook events.
    Set Subscriber3 = New EasyUASubscriber
    
    OutputText = OutputText & "Subscribing..." & vbCrLf
    Call Subscriber3.SubscribeDataSet(subscribeDataSetArguments)

    OutputText = OutputText & "Processing dataset message for 20 seconds..." & vbCrLf
    Pause 20000

    OutputText = OutputText & "Unsubscribing..." & vbCrLf
    Subscriber3.UnsubscribeAllDataSets

    OutputText = OutputText & "Waiting for 1 second..." & vbCrLf
    ' Unsubscribe operation is asynchronous, messages may still come for a short while.
    Pause 1000

    Set Subscriber3 = Nothing

    OutputText = OutputText & "Finished." & vbCrLf
End Sub

Private Sub Subscriber3_DataSetMessage(ByVal sender As Variant, ByVal eventArgs As EasyUADataSetMessageEventArgs)
    ' Display the dataset
    If eventArgs.Succeeded Then
        ' An event with null DataSetData just indicates a successful connection.
        If Not eventArgs.DataSetData Is Nothing Then
            OutputText = OutputText & vbCrLf
            OutputText = OutputText & "Dataset data: " & eventArgs.DataSetData & vbCrLf
            Dim dictionaryEntry2: For Each dictionaryEntry2 In eventArgs.DataSetData.FieldDataDictionary
                OutputText = OutputText & dictionaryEntry2 & vbCrLf
            Next
        End If
    Else
        OutputText = OutputText & vbCrLf
        OutputText = OutputText & "*** Failure: " & eventArgs.ErrorMessageBrief & vbCrLf
    End If
End Sub
' Example output:
'
'Subscribing...
'Processing dataset message events for 20 seconds...
'
'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
'[BoolToggle, False {System.Boolean}; Good]
'[Int32, 3072 {System.Int32}; Good]
'[Int32Fast, 894 {System.Int32}; Good]
'[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
'
'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
'[BoolToggle, False {System.Boolean}; Good]
'[Int32, 3072 {System.Int32}; Good]
'[Int32Fast, 920 {System.Int32}; Good]
'[DateTime, 10/1/2019 12:21:14 PM {System.DateTime}; Good]
'
'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
'[BoolToggle, False {System.Boolean}; Good]
'[Int32, 3073 {System.Int32}; Good]
'[Int32Fast, 1003 {System.Int32}; Good]
'[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
'
'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
'[BoolToggle, False {System.Boolean}; Good]
'[Int32, 3073 {System.Int32}; Good]
'[Int32Fast, 1074 {System.Int32}; Good]
'[DateTime, 10/1/2019 12:21:15 PM {System.DateTime}; Good]
'
'Dataset data: Good; Data; publisher=(UInt16)30, group=101, fields: 4
'[BoolToggle, True {System.Boolean}; Good]
'[Int32, 3074 {System.Int32}; Good]
'[Int32Fast, 1140 {System.Int32}; Good]
'[DateTime, 10/1/2019 12:21:16 PM {System.DateTime}; Good]
'
'...
// This example shows how to subscribe to all dataset messages on an OPC-UA PubSub connection with MQTT JSON mapping using
// TCP.
//
// The following package needs to be referenced in your project (or otherwise made available) for the MQTT transport to 
// work.
// - OpcLabs.MqttNet
// Refer to the documentation for more information.

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.Engine;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void MqttJsonTcp()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            // Default port with MQTT is 1883.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "mqtt://opcua-pubsub.demo-this.com";
            // Specify the transport protocol mapping.
            // The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
            // https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
            pubSubConnectionDescriptor.TransportProfileUriString = UAPubSubTransportProfileUriStrings.MqttJson;

            // Define the arguments for subscribing to the dataset, specifying the MQTT topic name.
            var subscribeDataSetArguments = new UASubscribeDataSetArguments(pubSubConnectionDescriptor)
            {
                DataSetSubscriptionDescriptor = {CommunicationParameters = {BrokerDataSetReaderTransportParameters =
                {
                    QueueName = "opcuademo/json"
                }}}
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_MqttJsonTcp;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(subscribeDataSetArguments);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_MqttJsonTcp(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessage}");
            }
        }

        // Example output:
        //
        //Subscribing...
        //Processing dataset message events for 20 seconds...
        //
        //Dataset data: 2020-01-21T17:07:19.778,836,700,00; Good; Data; publisher=[String]31, class=eae79794-1af7-4f96-8401-4096cd1d8908, fields: 4
        //[BoolToggle, True {System.Boolean} @2020-01-21T16:07:19.778,836,700,00; Good]
        //[Int32, 482 {System.Int64} @2020-01-21T16:07:19.778,836,700,00; Good]
        //[Int32Fast, 2287 {System.Int64} @2020-01-21T16:07:19.778,836,700,00; Good]
        //[DateTime, 1/21/2020 5:07:19 PM {System.DateTime} @2020-01-21T16:07:19.778,836,700,00; Good]
        //
        //Dataset data: Good; Data; publisher=[String]32, fields: 4
        //[BoolToggle, True {System.Boolean}; Good]
        //[Int32, 482 {System.Int32}; Good]
        //[Int32Fast, 2287 {System.Int32}; Good]
        //[DateTime, 1/21/2020 5:07:19 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher=[String]32, fields: 100
        //[Mass_0, 82 {System.Int64}; Good]
        //[Mass_1, 182 {System.Int64}; Good]
        //[Mass_2, 282 {System.Int64}; Good]
        //[Mass_3, 382 {System.Int64}; Good]
        //[Mass_4, 482 {System.Int64}; Good]
        //[Mass_5, 582 {System.Int64}; Good]
        //[Mass_6, 682 {System.Int64}; Good]
        //[Mass_7, 782 {System.Int64}; Good]
        //[Mass_8, 882 {System.Int64}; Good]
        //[Mass_9, 982 {System.Int64}; Good]
        //[Mass_10, 1082 {System.Int64}; Good]
        ////...
    }
}
# This example shows how to subscribe to all dataset messages on an OPC-UA PubSub connection with MQTT JSON mapping using
# TCP.
#
# The following package needs to be referenced in your project (or otherwise made available) for the MQTT transport to
# work.
# - OpcLabs.MqttNet
# Refer to the documentation for more information.

# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc
import opclabs_mqttnet
import time

# Import .NET namespaces.
from OpcLabs.EasyOpc.UA.PubSub import *
from OpcLabs.EasyOpc.UA.PubSub.Engine import *
from OpcLabs.EasyOpc.UA.PubSub.OperationModel import *


def dataSetMessage(sender, e):
    # Display the dataset.
    if e.Succeeded:
        # An event with null DataSetData just indicates a successful connection.
        if e.DataSetData is not None:
            print('')
            print('Dataset data: ', e.DataSetData, sep='')
            for pair in e.DataSetData.FieldDataDictionary:
                print(pair)
    else:
        print('')
        print('*** Failure: ', e.ErrorMessageBrief, sep='')
        print('*** Failure: ', e.Exception, sep='')


# Define the PubSub connection we will work with. Uses implicit conversion from a string.
# Default port with MQTT is 1883.
pubSubConnectionDescriptor = UAPubSubConnectionDescriptor.op_Implicit('mqtt://opcua-pubsub.demo-this.com')
# Specify the transport protocol mapping.
# The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
# https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
pubSubConnectionDescriptor.TransportProfileUriString = UAPubSubTransportProfileUriStrings.MqttJson

# Define the arguments for subscribing to the dataset, specifying the MQTT topic name.
subscribeDataSetArguments = UASubscribeDataSetArguments(pubSubConnectionDescriptor)
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.BrokerDataSetReaderTransportParameters.\
    QueueName = 'opcuademo/json'

# Instantiate the subscriber object and hook events.
subscriber = EasyUASubscriber()
subscriber.DataSetMessage += dataSetMessage

print('Subscribing...')
IEasyUASubscriberExtension.SubscribeDataSet(subscriber, subscribeDataSetArguments)

print('Processing dataset message events for 20 seconds...')
time.sleep(20)

print('Unsubscribing...')
subscriber.UnsubscribeAllDataSets()

print('Waiting for 1 second...')
# Unsubscribe operation is asynchronous, messages may still come for a short while.
time.sleep(1)

subscriber.DataSetMessage -= dataSetMessage

print('Finished.')
Rem The following package needs to be referenced in your project (or otherwise made available) for the MQTT transport to 
Rem work.
Rem - OpcLabs.MqttNet
Rem Refer to the documentation for more information.

' The subscriber object, with events
'Public WithEvents Subscriber4 As EasyUASubscriber

Private Sub EasyUASubscriber_SubscribeDataSet_MqttJsonTcp_Command_Click()
    OutputText = ""
    
    ' Define the PubSub connection we will work with. Uses implicit conversion from a string.
    ' Default port with MQTT is 1883.
    Dim subscribeDataSetArguments As New EasyUASubscribeDataSetArguments
    Dim pubSubConnectionDescriptor As UAPubSubConnectionDescriptor
    Set pubSubConnectionDescriptor = subscribeDataSetArguments.dataSetSubscriptionDescriptor.ConnectionDescriptor
    pubSubConnectionDescriptor.ResourceAddress.ResourceDescriptor.UrlString = "mqtt://opcua-pubsub.demo-this.com:1883"
    ' Specify the transport protocol mapping.
    ' The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
    ' https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
    pubSubConnectionDescriptor.TransportProfileUriString = "http://opcfoundation.org/UA-Profile/Transport/pubsub-mqtt-json" ' UAPubSubTransportProfileUriStrings.MqttJson

    ' Define the arguments for subscribing to the dataset, specifying the MQTT topic name.
    subscribeDataSetArguments.dataSetSubscriptionDescriptor.CommunicationParameters.BrokerDataSetReaderTransportParameters.QueueName = "opcuademo/json"
    
    ' Instantiate the subscriber object and hook events.
    Set Subscriber4 = New EasyUASubscriber
    
    OutputText = OutputText & "Subscribing..." & vbCrLf
    Call Subscriber4.SubscribeDataSet(subscribeDataSetArguments)

    OutputText = OutputText & "Processing dataset message for 20 seconds..." & vbCrLf
    Pause 20000

    OutputText = OutputText & "Unsubscribing..." & vbCrLf
    Subscriber4.UnsubscribeAllDataSets

    OutputText = OutputText & "Waiting for 1 second..." & vbCrLf
    ' Unsubscribe operation is asynchronous, messages may still come for a short while.
    Pause 1000

    Set Subscriber1 = Nothing

    OutputText = OutputText & "Finished." & vbCrLf
End Sub

Private Sub Subscriber4_DataSetMessage(ByVal sender As Variant, ByVal eventArgs As EasyUADataSetMessageEventArgs)
    ' Display the dataset
    If eventArgs.Succeeded Then
        ' An event with null DataSetData just indicates a successful connection.
        If Not eventArgs.DataSetData Is Nothing Then
            OutputText = OutputText & vbCrLf
            OutputText = OutputText & "Dataset data: " & eventArgs.DataSetData & vbCrLf
            Dim dictionaryEntry2: For Each dictionaryEntry2 In eventArgs.DataSetData.FieldDataDictionary
                OutputText = OutputText & dictionaryEntry2 & vbCrLf
            Next
        End If
    Else
        OutputText = OutputText & vbCrLf
        OutputText = OutputText & eventArgs.ErrorMessageBrief & vbCrLf
    End If
End Sub
' Example output:
'
'Subscribing...
'Processing dataset message events for 20 seconds...
'
'Dataset data: 2020-01-21T17:07:19.778,836,700,00; Good; Data; publisher=[String]31, class=eae79794-1af7-4f96-8401-4096cd1d8908, fields: 4
'[BoolToggle, True {System.Boolean} @2020-01-21T16:07:19.778,836,700,00; Good]
'[Int32, 482 {System.Int64} @2020-01-21T16:07:19.778,836,700,00; Good]
'[Int32Fast, 2287 {System.Int64} @2020-01-21T16:07:19.778,836,700,00; Good]
'[DateTime, 1/21/2020 5:07:19 PM {System.DateTime} @2020-01-21T16:07:19.778,836,700,00; Good]
'
'Dataset data: Good; Data; publisher=[String]32, fields: 4
'[BoolToggle, True {System.Boolean}; Good]
'[Int32, 482 {System.Int32}; Good]
'[Int32Fast, 2287 {System.Int32}; Good]
'[DateTime, 1/21/2020 5:07:19 PM {System.DateTime}; Good]
'
'Dataset data: Good; Data; publisher=[String]32, fields: 100
'[Mass_0, 82 {System.Int64}; Good]
'[Mass_1, 182 {System.Int64}; Good]
'[Mass_2, 282 {System.Int64}; Good]
'[Mass_3, 382 {System.Int64}; Good]
'[Mass_4, 482 {System.Int64}; Good]
'[Mass_5, 582 {System.Int64}; Good]
'[Mass_6, 682 {System.Int64}; Good]
'[Mass_7, 782 {System.Int64}; Good]
'[Mass_8, 882 {System.Int64}; Good]
'[Mass_9, 982 {System.Int64}; Good]
'[Mass_10, 1082 {System.Int64}; Good]
'...
// This example shows how to subscribe to all dataset messages on an OPC-UA PubSub connection with MQTT UADP mapping using
// TCP.
//
// The OpcLabs.MqttNet assembly needs to be referenced in your project (or otherwise made available, together with its
// dependencies) for the MQTT transport to work. Refer to the documentation for more information.

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.Engine;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void MqttUadpTcp()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            // Default port with MQTT is 1883.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "mqtt://opcua-pubsub.demo-this.com";
            // Specify the transport protocol mapping.
            // The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
            // https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
            pubSubConnectionDescriptor.TransportProfileUriString = UAPubSubTransportProfileUriStrings.MqttUadp;

            // Define the arguments for subscribing to the dataset, specifying the MQTT topic name.
            var subscribeDataSetArguments = new UASubscribeDataSetArguments(pubSubConnectionDescriptor)
            {
                DataSetSubscriptionDescriptor = {CommunicationParameters = {BrokerDataSetReaderTransportParameters =
                {
                    QueueName = "opcuademo/uadp/none"
                }}}
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_MqttUadpTcp;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(subscribeDataSetArguments);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_MqttUadpTcp(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessage}");
            }
        }

        // Example output:
        //
        //Subscribing...
        //Processing dataset message events for 20 seconds...
        //
        //Dataset data: Good; Data; publisher="32", writer=1, class=eae79794-1af7-4f96-8401-4096cd1d8908, fields: 4
        //[#0, False {System.Boolean}; Good]
        //[#1, 6685 {System.Int32}; Good]
        //[#2, 1444 {System.Int32}; Good]
        //[#3, 1/4/2020 6:06:20 PM {System.DateTime}; Good]
        //
        //Dataset data: Good; Data; publisher="32", writer=3, class=96976b7b-0db7-46c3-a715-0979884b55ae, fields: 100
        //[#0, 85 {System.Int64}; Good]
        //[#1, 185 {System.Int64}; Good]
        //[#2, 285 {System.Int64}; Good]
        //[#3, 385 {System.Int64}; Good]
        //[#4, 485 {System.Int64}; Good]
        //[#5, 585 {System.Int64}; Good]
        //[#6, 685 {System.Int64}; Good]
        //[#7, 785 {System.Int64}; Good]
        //[#8, 885 {System.Int64}; Good]
        //[#9, 985 {System.Int64}; Good]
        //[#10, 1085 {System.Int64}; Good]
        //...
    }
}
# This example shows how to subscribe to all dataset messages on an OPC-UA PubSub connection with MQTT UADP mapping
# using TCP.
#
# The following package needs to be referenced in your project (or otherwise made available) for the MQTT transport to
# work.
# - OpcLabs.MqttNet
# Refer to the documentation for more information.

# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc
import time

# Import .NET namespaces.
from OpcLabs.EasyOpc.UA.PubSub import *
from OpcLabs.EasyOpc.UA.PubSub.Engine import *
from OpcLabs.EasyOpc.UA.PubSub.OperationModel import *


def dataSetMessage(sender, e):
    # Display the dataset.
    if e.Succeeded:
        # An event with null DataSetData just indicates a successful connection.
        if e.DataSetData is not None:
            print('')
            print('Dataset data: ', e.DataSetData, sep='')
            for pair in e.DataSetData.FieldDataDictionary:
                print(pair)
    else:
        print('')
        print('*** Failure: ', e.ErrorMessageBrief, sep='')


# Define the PubSub connection we will work with. Uses implicit conversion from a string.
# Default port with MQTT is 1883.
pubSubConnectionDescriptor = UAPubSubConnectionDescriptor.op_Implicit('mqtt://opcua-pubsub.demo-this.com')
# Specify the transport protocol mapping.
# The statement below isn't actually necessary, due to automatic message mapping recognition feature; see
# https://kb.opclabs.com/OPC_UA_PubSub_Automatic_Message_Mapping_Recognition for more details.
pubSubConnectionDescriptor.TransportProfileUriString = UAPubSubTransportProfileUriStrings.MqttUadp

# Define the arguments for subscribing to the dataset, specifying the MQTT topic name.
subscribeDataSetArguments = UASubscribeDataSetArguments(pubSubConnectionDescriptor)
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.BrokerDataSetReaderTransportParameters.\
    QueueName = 'opcuademo/uadp/none'

# Instantiate the subscriber object and hook events.
subscriber = EasyUASubscriber()
subscriber.DataSetMessage += dataSetMessage

print('Subscribing...')
IEasyUASubscriberExtension.SubscribeDataSet(subscriber, subscribeDataSetArguments)

print('Processing dataset message events for 20 seconds...')
time.sleep(20)

print('Unsubscribing...')
subscriber.UnsubscribeAllDataSets()

print('Waiting for 1 second...')
# Unsubscribe operation is asynchronous, messages may still come for a short while.
time.sleep(1)

subscriber.DataSetMessage -= dataSetMessage

print('Finished.')
// This example shows how to securely subscribe to signed and encrypted dataset messages.
// An external Security Key Service (SKS) is needed (not a part of QuickOPC).
//
// The network messages for this example can be published e.g. using the UADemoPublisher tool - see
// https://kb.opclabs.com/How_to_publish_or_subscribe_to_secure_OPC_UA_PubSub_messages .

using System;
using System.Collections.Generic;
using System.Threading;
using OpcLabs.EasyOpc.UA.Engine;
using OpcLabs.EasyOpc.UA.PubSub;
using OpcLabs.EasyOpc.UA.PubSub.OperationModel;

namespace UADocExamples.PubSub._EasyUASubscriber
{
    partial class SubscribeDataSet
    {
        public static void Secure()
        {
            // Define the PubSub connection we will work with. Uses implicit conversion from a string.
            UAPubSubConnectionDescriptor pubSubConnectionDescriptor = "opc.udp://239.0.0.1";
            // In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
            // the statement below. Your actual interface name may differ, of course.
            //pubSubConnectionDescriptor.ResourceAddress.InterfaceName = "Ethernet";

            // Define the arguments for subscribing to the dataset.
            var subscribeDataSetArguments = new UASubscribeDataSetArguments(pubSubConnectionDescriptor)
            {
                DataSetSubscriptionDescriptor =
                {
                    CommunicationParameters =
                    {
                        // Specifies the security mode for the PubSub network messages received. This is a minimum security
                        // mode that you want to accept.
                        SecurityMode = UAMessageSecurityModes.SecuritySignAndEncrypt,
                        SecurityKeyServiceTemplate =
                        {
                            // Specifies the URL of the SKS (Security Key Service) endpoint.
                            UrlString = "opc.tcp://localhost:48010", 
                            // Specifies the security mode that will be used to connect to the SKS.
                            EndpointSelectionPolicy = UAMessageSecurityModes.SecuritySignAndEncrypt,
                            // Specifies the user name and password used for "logging in" to the SKS.
                            UserIdentity = { UserNameTokenInfo = { UserName = "root", Password = "secret" }}
                        },
                        // Specifies the Id of the security group in the SKS that will be used (the security group in the
                        // SKS is configured to use certain security policy, and has other parameters detailing how the
                        // security keys are generated).
                        SecurityGroupId = "TestGroup"
                    }
                }
            };

            // Instantiate the subscriber object and hook events.
            var subscriber = new EasyUASubscriber();
            subscriber.DataSetMessage += subscriber_DataSetMessage_Secure;

            Console.WriteLine("Subscribing...");
            subscriber.SubscribeDataSet(subscribeDataSetArguments);

            Console.WriteLine("Processing dataset message events for 20 seconds...");
            Thread.Sleep(20 * 1000);

            Console.WriteLine("Unsubscribing...");
            subscriber.UnsubscribeAllDataSets();

            Console.WriteLine("Waiting for 1 second...");
            // Unsubscribe operation is asynchronous, messages may still come for a short while.
            Thread.Sleep(1 * 1000);

            Console.WriteLine("Finished.");
        }

        static void subscriber_DataSetMessage_Secure(object sender, EasyUADataSetMessageEventArgs e)
        {
            // Display the dataset.
            if (e.Succeeded)
            {
                // An event with null DataSetData just indicates a successful connection.
                if (!(e.DataSetData is null))
                {
                    Console.WriteLine();
                    Console.WriteLine($"Dataset data: {e.DataSetData}");
                    foreach (KeyValuePair<string, UADataSetFieldData> pair in e.DataSetData.FieldDataDictionary)
                        Console.WriteLine(pair);
                }
            }
            else
            {
                Console.WriteLine();
                Console.WriteLine($"*** Failure: {e.ErrorMessageBrief}");
            }
        }
    }
}
# This example shows how to securely subscribe to signed and encrypted dataset messages.
# An external Security Key Service (SKS) is needed (not a part of QuickOPC).
#
# In order to produce network messages for this example, run the UADemoPublisher tool. For documentation, see
# http://kb.opclabs.com/UADemoPublisher_Basics . In some cases, you may have to specify the interface name to be used.

# The QuickOPC package is needed. Install it using "pip install opclabs_quickopc".
import opclabs_quickopc
import time

# Import .NET namespaces.
from OpcLabs.EasyOpc.UA.Engine import *
from OpcLabs.EasyOpc.UA.PubSub import *
from OpcLabs.EasyOpc.UA.PubSub.OperationModel import *


def dataSetMessage(sender, e):
    # Display the dataset.
    if e.Succeeded:
        # An event with null DataSetData just indicates a successful connection.
        if e.DataSetData is not None:
            print('')
            print('Dataset data: ', e.DataSetData, sep='')
            for pair in e.DataSetData.FieldDataDictionary:
                print(pair)
    else:
        print('')
        print('*** Failure: ', e.ErrorMessageBrief, sep='')


# Define the PubSub connection we will work with. Uses implicit conversion from a string.
pubSubConnectionDescriptor = UAPubSubConnectionDescriptor.op_Implicit('opc.udp://239.0.0.1')
# In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
# the statement below. Your actual interface name may differ, of course.
#pubSubConnectionDescriptor.ResourceAddress.InterfaceName = 'Ethernet'

# Define the arguments for subscribing to the dataset.
subscribeDataSetArguments = UASubscribeDataSetArguments(pubSubConnectionDescriptor)
# Specifies the security mode for the PubSub network messages received. This is a minimum security
# mode that you want to accept.
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.\
    SecurityMode = UAMessageSecurityModes.SecuritySignAndEncrypt
# Specifies the URL of the SKS (Security Key Service) endpoint.
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.SecurityKeyServiceTemplate.\
    UrlString = 'opc.tcp://localhost:48010'
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.SecurityKeyServiceTemplate.\
    EndpointSelectionPolicy = UAEndpointSelectionPolicy.FromUAMessageSecurityModes(UAMessageSecurityModes.SecuritySignAndEncrypt)
# Specifies the user name and password used for "logging in" to the SKS.
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.SecurityKeyServiceTemplate.\
    UserIdentity.UserNameTokenInfo.UserName = 'root'
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.SecurityKeyServiceTemplate.\
    UserIdentity.UserNameTokenInfo.Password = 'secret'
# Specifies the Id of the security group in the SKS that will be used (the security group in the
# SKS is configured to use certain security policy, and has other parameters detailing how the
# security keys are generated).
subscribeDataSetArguments.DataSetSubscriptionDescriptor.CommunicationParameters.SecurityGroupId = 'TestGroup'

# Instantiate the subscriber object and hook events.
subscriber = EasyUASubscriber()
subscriber.DataSetMessage += dataSetMessage

print('Subscribing...')
IEasyUASubscriberExtension.SubscribeDataSet(subscriber, subscribeDataSetArguments)

print('Processing dataset message events for 20 seconds...')
time.sleep(20)

print('Unsubscribing...')
subscriber.UnsubscribeAllDataSets()

print('Waiting for 1 second...')
# Unsubscribe operation is asynchronous, messages may still come for a short while.
time.sleep(1)

subscriber.DataSetMessage -= dataSetMessage

print('Finished.')
Rem This example shows how to securely subscribe to signed and encrypted dataset messages.
Rem An external Security Key Service (SKS) is needed (not a part of QuickOPC).
Rem
Rem The network messages for this example can be published e.g. using the UADemoPublisher tool - see
Rem https://kb.opclabs.com/How_to_publish_or_subscribe_to_secure_OPC_UA_PubSub_messages .

' The subscriber object, with events
'Public WithEvents Subscriber6 As EasyUASubscriber

Private Sub EasyUASubscriber_SubscribeDataSet_Secure_Command_Click()
    OutputText = ""
    
    ' Define the PubSub connection we will work with.
    Dim subscribeDataSetArguments As New EasyUASubscribeDataSetArguments
    Dim ConnectionDescriptor As UAPubSubConnectionDescriptor
    Set ConnectionDescriptor = subscribeDataSetArguments.dataSetSubscriptionDescriptor.ConnectionDescriptor
    ConnectionDescriptor.ResourceAddress.ResourceDescriptor.UrlString = "opc.udp://239.0.0.1"
    ' In some cases you may have to set the interface (network adapter) name that needs to be used, similarly to
    ' the statement below. Your actual interface name may differ, of course.
    'ConnectionDescriptor.ResourceAddress.InterfaceName := 'Ethernet';

    ' Define the arguments for subscribing to the dataset.
    Dim comunicationParameters As New UASubscriberCommunicationParameters
    ' Specifies the security mode for the PubSub network messages received. This is a minimum security
    ' mode that you want to accept.
    comunicationParameters.SecurityMode = UAMessageSecurityModes_SecuritySignAndEncrypt
    ' Specifies the URL of the SKS (Security Key Service) endpoint.
    comunicationParameters.SecurityKeyServiceTemplate.UrlString = "opc.tcp://localhost:48010"
    ' Specifies the security mode that will be used to connect to the SKS.
    Dim endpointSelectionPolicy As New UAEndpointSelectionPolicy
    endpointSelectionPolicy.AllowedMessageSecurityModes = UAMessageSecurityModes_SecuritySignAndEncrypt
    Set comunicationParameters.SecurityKeyServiceTemplate.endpointSelectionPolicy = endpointSelectionPolicy ' UAMessageSecurityModes_SecuritySignAndEncrypt
    ' Specifies the user name and password used for "logging in" to the SKS.
    comunicationParameters.SecurityKeyServiceTemplate.UserIdentity.UserNameTokenInfo.UserName = "root"
    comunicationParameters.SecurityKeyServiceTemplate.UserIdentity.UserNameTokenInfo.Password = "secret"
    ' Specifies the Id of the security group in the SKS that will be used (the security group in the
    ' SKS is configured to use certain security policy, and has other parameters detailing how the
    ' security keys are generated).
    comunicationParameters.securityGroupId = "TestGroup"
    
    Set subscribeDataSetArguments.dataSetSubscriptionDescriptor.CommunicationParameters = comunicationParameters
    
    ' Instantiate the subscriber object and hook events.
    Set Subscriber6 = New EasyUASubscriber
        
    OutputText = OutputText & "Subscribing..." & vbCrLf
    Call Subscriber6.SubscribeDataSet(subscribeDataSetArguments)

    OutputText = OutputText & "Processing dataset message for 20 seconds..." & vbCrLf
    Pause 20000

    OutputText = OutputText & "Unsubscribing..." & vbCrLf
    Subscriber6.UnsubscribeAllDataSets

    OutputText = OutputText & "Waiting for 1 second..." & vbCrLf
    ' Unsubscribe operation is asynchronous, messages may still come for a short while.
    Pause 1000

    Set Subscriber6 = Nothing

    OutputText = OutputText & "Finished." & vbCrLf
End Sub

Private Sub Subscriber6_DataSetMessage(ByVal sender As Variant, ByVal eventArgs As EasyUADataSetMessageEventArgs)
    ' Display the dataset
    If eventArgs.Succeeded Then
        ' An event with null DataSetData just indicates a successful connection.
        If Not eventArgs.DataSetData Is Nothing Then
            OutputText = OutputText & vbCrLf
            OutputText = OutputText & "Dataset data: " & eventArgs.DataSetData & vbCrLf
            Dim dictionaryEntry2: For Each dictionaryEntry2 In eventArgs.DataSetData.FieldDataDictionary
                OutputText = OutputText & dictionaryEntry2 & vbCrLf
            Next
        End If
    Else
        OutputText = OutputText & vbCrLf
        OutputText = OutputText & eventArgs.ErrorMessageBrief & vbCrLf
    End If
End Sub
Requirements

Target Platforms: .NET Framework: Windows 10 (selected versions), Windows 11 (selected versions), Windows Server 2016, Windows Server 2022; .NET: Linux, macOS, Microsoft Windows

See Also